UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43613

13.2 - ModelSim - ModelSim Stalls when Trying to Load ramb16wer from Unisims Library

Description

I am running a behavioral simulation in ModelSim. However, when I try to simulate in ModelSim, the simulator crashes while trying to load the RAMB16wer from the Unisims library.

Solution

There is a CR on this issue. However, to work around this issue, change the HDL language preferences from the Project Options in XPS, re-run simgen, and then relaunch ModelSim.

To do this, go to Project > Project Options. Under the design flow tab, select Verilog.
AR# 43613
Date Created 08/24/2011
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • EDK - 13.1
  • EDK - 13.2
IP
  • LMB BRAM Interface Controller
Boards & Kits
  • Spartan-3A DSP 1800A Embedded Kit
  • Spartan-3A Starter Kit
  • Spartan-3AN Starter Kit