UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43673

MIG Spartan-6 MCB - PHY Signals and Parameter Descriptions

Description

This section of the MIG Design Assistant describes the signals and parameters for Spartan-6 MCB designs. Below you will find information related to your specific question.

Note: This Answer Record is a part of the Xilinx MIG Solution Center (Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.

Solution

Core Architecture Signal and Parameter Descriptions
  • For the User Interface signals and descriptions, please see the MCB Functional Description > Interface Details section in UG388.
  • For the Port Configuration descriptions, please the MCB Functional Description > Port Configurations section in UG388.
  • For the Arbiter descriptions, please see the MCB Functional Description > Arbitration section in UG388.
  • For the Configuration Parameters descriptions, please see the MCB Functional Description > Programmability section in UG388.

Debugging Spartan-6 FPGA MCB Signal and Parameter Descriptions

  • For a list of signals and parameters of interest for debugging simulations, please check the Debugging MCB Designs > Simulation Debug section in UG416.

Documentation References

Linked Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
40683 MIG Spartan-6 MCB - PHY Architecture N/A N/A
AR# 43673
Date Created 08/25/2011
Last Updated 05/26/2014
Status Archive
Type General Article
Devices
  • Spartan-6 LX
  • Spartan-6 LXT
IP
  • MIG