We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43677

AXI Bridge for PCI Express - Working Example Design for the SP605 Development Board


The Base System Builder does not include the AXI bridge for PCI Express in EDK versions 13.2 and 13.3.This answer record provides the files necessary to set up a typical system.


The link below provides an ISE13.2 EDK project as well as a pre-built bit file targeting the SP605.


This project was built in ISE 13.2 software; however, it will migrate properly in 13.3.

Base System Builder will include the PCI Express Memory Mapped core in a future release of EDK.

Revision History

11/28/2011 - Update for 13.3 and title update
08/25/2011 - Initial Release

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
44972 AXI Bridge for PCI Express FAQ N/A N/A
AR# 43677
Date 12/15/2012
Status Active
Type General Article
  • AXI PCI Express (PCIe)
Page Bookmarked