UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43708

AXI Bridge for PCI Express - Changing C_AXIBAR_NUM does not grey out unused C_AXIBAR_#

Description

Version Found: 1.00.a
Version Resolved and other Known Issues: See (Xilinx Answer 44969) 

The C_AXIBAR_NUM attribute describes the number of translations from the AXI address space to the PCI Express address space. The customization GUI for the AXI Memory Mapped core for PCI Express does not grey out the upper C_AXIBAR_# fields when the C_AXIBAR_NUM value indicates the C_AXIBAR_# will not be used. 

This issue also results with additional BARs in the address space in the Address tab of the System Assembly View.

NOTE: The "Version Found" column lists the version that the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

Solution

This is a known issue. Please ignore the upper C_AXIBAR_NUM values in the Address tab of the System Assembly View as they will not be used. 

This issue has been fixed in 13.3 with revision v1.01a of the bridge.

Revision History
11/21/2011 - Updated for 13.3
09/04/2011 - Initial Release

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
44969 AXI Bridge for PCI Express - Release Notes and Known Issues for All Versions up to ISE 14.7 N/A N/A

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
44969 AXI Bridge for PCI Express - Release Notes and Known Issues for All Versions up to ISE 14.7 N/A N/A
AR# 43708
Date Created 11/22/2011
Last Updated 05/26/2014
Status Archive
Type Known Issues
IP
  • AXI PCI Express (PCIe)