We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4372

4.2i Foundation - How do I run Multi-Pass Place-and-Route with Foundation?


Keywords: MPPR, guide, Design Manager, stand-alone, standalone, PAR

Urgency: Standard

General Description:
I am using Foundation -- how do I run Multi-Pass Place-and-Route?


In order to use these features, you must run the Design Manager in stand-alone mode.

To run Multi-Pass Place-and-Route, select Start -> Programs -> Xilinx Foundation 4 -> Accessories -> Design Manager.

Open your project in the Design Manager, and the versions and revisions should appear just as they do in the Foundation Project Manager. (If this does not happen, please see (Xilinx Answer 4401) for further assistance.)

To run Multi-Pass Place and Route, select Design -> FPGA Multi-Pass Place & Route with the desired version highlighted.
AR# 4372
Date Created 07/29/1998
Last Updated 08/12/2003
Status Archive
Type General Article