UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43759

13.4 PlanAhead - Bitgen options are not saved between implementation runs

Description

When I add a Bitgen option in the More Options dialog box (for example -g ConfigRate:26) it only applies to a single Bitgen run.

I can set the desired Bitgen options and generate a bitstream correctly with those options.

However, if I then re-run the Implementation, my Bitgen options have not been not saved.

Solution

This is a Known issue and is resolved in PlanAhead from release 14.1 on.

In earlier versions, you will need to re-enter the options following each implementation iteration.
AR# 43759
Date Created 03/02/2012
Last Updated 08/11/2014
Status Active
Type Known Issues
Tools
  • PlanAhead - 13.2
  • PlanAhead - 13.3
  • PlanAhead - 13.4