UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 43868

12.x EDK - Where do I find the source files of the standalone tests?

Description

When usingaXilinx Development Board to run the standalone tests provided with that board, I seethat there are ELF files andbitstream filesavailable.

Where doI find the source code to generate the ELF files?

Solution

The source files are available in the same location as the standalone files, as shown in the Figure below.

For example, as shown above,hello_pci.elf is foundin sw folder of ML510 BSB1 Design Std IP Addition.zip folder, available with the BSB designs provided for that board.

Please refer to (Xilinx Answer 43741) for the location of BSB designs for all ML50x boards.

Linked Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
43741 Development Boards Where can I find EDK reference designs for ML50x boards? N/A N/A
AR# 43868
Date Created 08/30/2011
Last Updated 12/15/2012
Status Active
Type General Article
Boards & Kits