UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4391

F1.5: Virtex Configuration Stage - Project Manager reports Implementation Errors

Description

Keywords: Virtex, implementation, configuration, bitgen

Urgency: Hot

Description: When running through the Virtex design flow, the Flow Engine completes all stages except Configuration without fault. The Project Manager reports that Configure fails with errors:

Xie: Flow Engine: ver2->rev1 (Timed ERRORS)
Xie: Flow Engine: ver2->rev1 (ERRORS Implemented)

The Bitgen report simply reports a warning:

WARNING:basbs:134 - bitgen only supports DRC on this device.

No ERRORS are reported anywhere.

Solution

Bitstream generation for Virtex devices will be enabled with the F1.5 Performance Pack. Until that release is available, please deselect the
"Produce Configuration Data" checkbox in the Implementation Options.
AR# 4391
Date Created 08/03/1998
Last Updated 03/06/2002
Status Archive
Type General Article