We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44089

Kintex-7 GTX IBERT - Incorrect "RX Equalization" Label should read "RX Common Mode" Instead


In the Kintex-7 GTX IBERT Analyzer GUI, there is a drop down menu to select RX Equalization. The "RX Equalization" label should be "RX Common Mode" instead. This answer record discusses this issue that is present in the 13.2 and 13.3 software.


The RX Equalization drop down menu in the IBERT GUI for Kintex-7 GTX is actually changing the value for RX_CM_TRIM. The RX Equalization field should be labeled RX Common Mode instead.This is a known issue in the 13.2 and 13.3 software. This will be fixed in 13.4 Design Suite.
AR# 44089
Date Created 09/14/2011
Last Updated 05/19/2012
Status Active
Type Known Issues
  • Kintex-7
  • ChipScope Pro - 13.2