We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44195

Configuration - What should be connected to CSI_B and RDWR_B when configuring from BPI Flash?


If my board uses BPI mode for configuration, what should CSI_B and RDWR_B be connected to?


If post-configuration readback (via the SelectMAP interface) is not necessary, then these pins can be tied high. These pins should have no affect on BPI configuration in these families.

AR# 44195
Date Created 09/20/2011
Last Updated 03/14/2016
Status Active
Type General Article
  • Kintex-7
  • Artix-7
  • Spartan-6
  • More
  • Virtex-5
  • Virtex-7
  • Virtex-6
  • Less