We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44301

LogiCORE IP Serial RapidIO Gen2 v1.2 - Asserting link_reset Does Not Reset the Core


When I assert link_reset to reset the core, I still see packets are sent.


This is a known issue, you must stop all traffic through the core before asserting link_reset, otherwise, the reset does not occur properly and packets are still sent during this process.This will be fixed in the v1.3 release of the core.

Revision History:
10/26/2011 - Initial Release

AR# 44301
Date 05/19/2012
Status Active
Type Known Issues
  • Serial RapidIO
Page Bookmarked