UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44429

14.7 EDK - How can I configure the DVI Chrontel Chip available on development boards using EDK?

Description

There are DVI Chrontel Chips available on ML605 and SP605 boards.

How can I configure the DVI Chrontel chips for a processor based application.
 
Does Xilinx provide any EDK IPs to do this?

Solution

EDK provides two IPs to configure the DVI Chrontel Chip. 

One is a TFT controller and the other is IIC.

The TFT Controller is PLBv46 based.

IIC is available with both PLBv46 and AXI interfaces.

AR# 44429
Date Created 10/06/2011
Last Updated 03/03/2015
Status Active
Type General Article
IP
  • XPS Thin Film Transistor Controller
  • AXI IIC Bus Interface
  • XPS IIC Bus Interface