We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44656

13.2 IBERT - "ERROR:coreutil - ERROR:sim:824..." occurs when I generate IBERT for xc7k355t from CORE Generator


In ISE 13.2 software, when I generate IBERT forxc7k355t from the CORE Generator interface, the following error occurs:

"Customizing IP...
Release 13.2 - Xilinx CORE Generator IP GUI Launcher O.61xd (nt64)
Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved.
ERROR:coreutil - ERROR:sim:824 - Something went wrong while preparing for IP customization.ERROR:sim - IP initializer could not set parameters on IP model
ERROR:sim - ERROR:sim - Failed to initialize IP model.
An Error occurred during Customization."

In ISE 13.3, the "IBERT Kintex-7 GTX" core is grayed out whenthe target device isxc7k355tin CORE Generator, and 355T is not listed in the supported families list.


The IBERT core does not supportthe xc7k355t devicein ISE 13.2 and 13.3 software. It is going to be added in a future release.
AR# 44656
Date 01/02/2013
Status Active
Type General Article
  • ChipScope Pro - 13.2
  • ChipScope Pro - 13.3
Page Bookmarked