We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44880

13.3 MPMC - File permissions result in an error when using the C_USE_MIG_FLOW parameter in MPMC


I am using the MPMC v6.05_a with the C_USE_MIG_FLOW parameter. However, I receive an error relating to the permissions in the "_xps/mig/platgen" folder during PlatGen when I invoke the MIG.

How do I work around this error?


There is a CR filed against the MPMC tcl.

To work around this issue there are two options:
  • revert to the older version of the MPMC v6.04_a, or
  • use the v6.05_a, but use the tcl file from the v6.04_a version.
AR# 44880
Date Created 11/07/2011
Last Updated 01/30/2012
Status Active
Type General Article
  • EDK - 13.2
  • EDK - 13.3