We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44886

13.3 XST - How do I specify more than one -change_error_to_warning?


I receive multiple errors that say to use -change_error_to warning "<Message>", but upon adding multiple-change_error_to_warning switchesonly the first message is accepted by XSTand the secondmessage is ignored. How can I apply the change to more than one message?


To change multiple errors to warnings, add the keyword"-change_error_to_warning", follow it with a space, include the first message, leave a space, and then include the second message. The following is an example that works:

-change_error_to_warning "HDLCompiler:532 HDLCompiler:597"

By contrast, the following is an example that does not work:

-change_error_to_warning "HDLCompiler:532"-change_error_to_warning "HDLCompiler:597"

AR# 44886
Date Created 11/11/2011
Last Updated 12/15/2012
Status Active
Type General Article
  • ISE Design Suite - 13.2
  • ISE Design Suite - 13.3