UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4496

Orcad Capture v6.11 components with inverted pins do not show inversion in XNF netlist

Description

keywords: Capture, Express, Windows,invertion, 6.11

Urgency: Standard

General description: Xilinx parts from Capture v6.11 do not show
applicable inversion in XNF netlist.

The new property field TYPE has been added to parts in Capture v6.11
design, but the inverted pins show up not inverted in my the netlist.

Solution

In addition to the TYPE part property, pins on Capture v7.00 parts
have a user property named PARAM.

Use the Capture v7.00 parts

or

add the PARAM parameter to the v6.11 parts to circumvent the problem.
AR# 4496
Date Created 08/26/1998
Last Updated 08/26/1998
Status Archive
Type General Article