UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44963

Virtex-6 CXT, 13.3, GTX IBERT - IBERT GUI in CORE Generator tool does not launch if project option is set to CX75T

Description

If I set the CORE Generator tool project options to target a Virtex-6 CX75T device in 13.3, the GTX IBERT GUI does not open and produces the following error message:

"ERROR:coreutil - ERROR:sim:824 - Something went wrong while preparing for IP customization.ERROR:sim - IP initializer could not set parameters on IP model

ERROR:sim - ERROR:sim - Failed to initialize IP model.
Cancelled Customization."

Solution

This is an issue inversion 13.3 of the software that is scheduled to be fixed in 13.4.

To work around the issue, open up a WebCase with Xilinx Technical Support at:
http://support.xilinx.com/support/clearexpress/websupport.htm

In the WebCase notes, please refer to this Answer Record (44963) and request the patch files.

AR# 44963
Date Created 12/08/2011
Last Updated 05/19/2012
Status Active
Type Known Issues
Devices
  • Virtex-6 CXT
Tools
  • ChipScope Pro - 13.3