Video Scaler v5.0 Patch
For a detailed list of LogiCORE IP Video Scaler Release Notes and Known Issues, and the issues that are fixed by this patch, see (Xilinx Answer 31958).
The v5.0 rev3 patch can be downloaded at:http://www.xilinx.com/txpatches/pub/swhelp/ise13_updates/ar45439_video_scaler_v5_0_rev3_13_x.zip
Installation and Use
Prior to installing the update, you must install the latest ISE Design Suite release of13.x, as required by the patch. The ISE Design Suite release can be obtained from the following link, if needed: http://www.xilinx.com/support/download/index.htm.
Install the patch by extracting the contents of the ZIP archive to the root directory of XILINX (Xilinx ISE software installation), or your MYXILINX environment variable. Select the option that allows the extractor to overwrite all of the existing files and maintain the directory structure predefined in the archive.
For information on finding the Xilinx install and using the environment variable, see (Xilinx Answer 11630).
For information on using the MYXILINX environment variable, see (Xilinx Answer 2493).
NOTE: If you do not have write permissions to the Xilinx Install directory, or cannot use the MYXILINX option, you might be required to have a system administrator install the patch.
You can determine if the patch has been properly installed by checking to see if patch_readme directory under theroot directory under XILINX, or the MYXILINXenvironment variable directories contains the_revX_readme.txt file(where X is the patch number).