UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 45816

LogiCORE IP XAUI v10.2 - GUI does not correctly restrict selection of 20G data rate and non 802.3 State Machines

Description

The XAUI v10.2 GUI does not correctly restrict the selection of the 20G data rate and non 802.3 State Machines. Currently, it shows these options selectable for all devices, but this is not correct.

For Virtex-4 and 7 Series devices, the 802.3 State Machines should be selected and grayed out. There should not be the option to deselect the 802.3 State Machines.

The 20G DXAUI option should only be selectable for Virtex-6 -3 speed grade devices and 7-Series -2 and -3 speed grade devices.

Solution

This has been patched in XAUI v10.2 rev1. To download the update, see (Xilinx Answer 45705).
AR# 45816
Date Created 01/13/2012
Last Updated 12/15/2012
Status Active
Type General Article
IP
  • XAUI