We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 459

Use of /MR as input precludes use as reset, even during initialization


The /MR pin can be configured as an input pin for some members of the
7300 family. If the /MR pin is configured as an input pin, then it will
always behave as an input pin, even during power-up when the device
is initializing itself. Thus, in order to use /MR to hold the device outputs
tri-stated after initialization, /MR must not be configured as an input pin.


AR# 459
Date Created 09/20/1995
Last Updated 01/15/2003
Status Archive
Type General Article