^

AR# 47597 Zynq-7000 AP SoC, Boot IOP - Micron 8Gb (on-die ECC) NAND devices do not work

The Micron Device ID codes (byte 1 of Address 00h of Flash ID parameter tables) that are known to not work in boot mode: 0xA3, 0xB3, 0xC3, 0xD3.

Impact:Minor.
Work-around:None
Configurations AffectedSystems that use the Quad-SPI boot mode and use Micron devices with the ID devices listed.
Device Revision(s) Affected:Refer to (Xilinx Answer 47916) - Zynq-7000 Design Advisory Master Answer Record.
AR# 47597
Date Created 10/25/2012
Last Updated 10/25/2012
Status Active
Type
Devices
  • Zynq-7000
Feed Back