UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47764

Zynq-7000 Debug - ARM DS-5 Getting Connected Guide on ZC702

Description

This article covers how to connect ARM Development Studio 5 (DS-5) to the Xilinx Zynq ZC702 evaluation board using either DSTREAM or Ethernet using gdbserver.

ARM DS-5 is a complete development suite with support for Linux, Android, bare metal and other operating systems.

Solution

The  document attached at the end of this answer record describes the steps needed to connect ARM DS-5 to the ZC702 board.

For more information on ARM DS-5, see www.arm.com/ds5.

For ARM DS-5 software related issues, please contact ARM support.

For ZC702 board and Zynq-7000 related issues, please contact XILINX support:


http://www.xilinx.com/support/techsup/tappinfo.htm

Attachments

Associated Attachments

Name File Size File Type
ZC702 DS-5 Getting Connected Guide 907 KB PDF

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
50863 Zynq-7000 AP SoC - Debug N/A N/A

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
46881 Zynq-7000 Debug - How do I set up a third-party debug environment on the ZC702 board? N/A N/A
AR# 47764
Date Created 05/07/2012
Last Updated 03/04/2015
Status Active
Type Documentation Changes
Devices
  • Zynq-7000
Boards & Kits
  • Zynq-7000 All Programmable SoC ZC702 Evaluation Kit