UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 50186

7 Series Integrated Block for PCI Express v1.5 (Vivado 2012.1) - x8 Link Width not supported on Artix devices

Description

Version Found: v1.5
Version Resolved and other Known Issues: See (Xilinx Answer 40469)

7 Series Integrated Block for PCI Express v1.5 does not support x8 link width. However, in the current tool version, it is possible to generate the core with x8 link width. The user should not select x8. The supported link widths are: x1, x2 and x4.

Solution

This is a known issue and will be fixed in a future release of the core.

NOTE: "Version Found" refers to the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

Revision History
05/31/2012 - Initial release

AR# 50186
Date Created 05/28/2012
Last Updated 05/30/2012
Status Active
Type Known Issues
Devices
  • Artix-7
Tools
  • Vivado - 2012.1
IP
  • 7 Series Integrated Block for PCI Express (PCIe)