UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 5027

Virtex - Are partial reconfiguration and partial readback supported in Virtex devices?

Description

General Description:

Are Virtex devices partially reconfigurable? If so, how can I take advantage of this feature?

Solution

Virtex devices support both partial reconfiguration and partial readback. Refer to the following Application Notes for more information:

(Xilinx XAPP138): "Virtex Configuration and Readback"

(Xilinx XAPP151): "Virtex Series Configuration Architecture User Guide"

(Xilinx XAPP153): "Status and Control Semaphore Registers Using Partial Reconfiguration"

(Xilinx XAPP290): "Two Flows for Partial Reconfiguration: Module-Based or Small Bit Manipulations"

AR# 5027
Date Created 08/21/2007
Last Updated 12/15/2012
Status Active
Type General Article