UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 50905

LogiCORE IP SMPTE SDI (SD/HD/3G-SDI) - Release Notes and Known Issues

Description

This answer record contains the Release Notes and Known Issues list for the LogiCORE IP SMPTE SD/HD/3G-SDI. 

The following information is listed for each version of the core:

  • New Features
  • Bug Fixes
  • Known Issues

LogiCORE IP SMPTE SDI (SD/HD/3G-SDI):

https://www.xilinx.com/content/xilinx/en/products/intellectual-property/smpte_sdi.html

Solution

General Known Issues

(Xilinx Answer 56449)rx_locked occasionally asserting when no SDI cable is connected
(Xilinx Answer 51092)How do I connect up the SMPTE SD/HD/3G-SDI core to the High Speed SERES on my device?
(Xilinx Answer 51114)Does the SMPTE SD/HD/3G-SDI IP support the GTX High Speed SERDES on Kintex-7 ES devices?
(Xilinx Answer 53522)How many cycles does the crc_err_a and crc_err_b remain asserted?
(Xilinx Answer 54366)Is the value mentioned in the Table 9 of Xapp592 & Xapp892 the frame rate?
(Xilinx Answer 59601)Does the SMPTE SD/HD/3G-SDI IP support Artix-7 -1 speed grade?


LogiCORE IP SMPTE SDI (SD/HD/3G-SDI) v1.0

  • Initial release in ISE Design Suite 14.2, Vivado Design Suite 2012.2

Supported Devices

  • Virtex-7
  • Kintex-7

New Features

  • Standards compliance:
    • SMPTE ST 259 (SD-SDI)
    • SMPTE ST 292 (HD-SDI)
    • SMPTE ST 372 (Dual Link HD-SDI)
    • SMPTE ST 424 and ST 425-1 (3G-SDI) including levels A, B-DL, and B-DS
    • SMPTE ST 352 (Payload ID)
    • SMPTE RP 165 (SD-SDI EDH)
  • Triple-Rate SDI receiver features:
    • A single reference clock frequency supports reception of 5 different bit rates:
      • 270 Mb/s SD-SDI
      • 1.485 Gb/s HD-SDI
      • 1.485/1.001 Gb/s HD-SDI
      • 2.97 Gb/s 3G-SDI
      • 2.97/1.001 Gb/s 3G-SDI
    • Automatically detects incoming SDI standard and bit rate
    • Automatically detects incoming video transport format
    • Detects and captures ST 352 packets
    • Checks for CRC errors for HD-SDI and 3G-SDI
    • Optionally checks for EDH errors for SD-SDI
  • Triple-Rate SDI transmitter features:
    • Only two reference clock frequencies are required to transmit five different bit rates:
      • 270 Mb/s SD-SDI
      • 1.485 Gb/s HD-SDI
      • 1.485/1.001 Gb/s HD-SDI
      • 2.97 Gb/s 3G-SDI
      • 2.97/1.001 Gb/s 3G-SDI
    • Generates and inserts CRC and line numbers for HD-SDI and 3G-SDI
    • Generates and inserts EDH packets for SD-SDI
    • Generates and inserts ST 352 packets for all SDI standards

Bug Fixes

  • N/A

Known Issues

(Xilinx Answer 60303)When targeting Artix-7 and using XAPP1097 v1.0, why do I see intermittent failures, or failure to lock when changing SDI standards?

Linked Answer Records

Child Answer Records

Associated Answer Records

AR# 50905
Date Created 07/19/2012
Last Updated 11/07/2016
Status Active
Type General Article
IP
  • SMPTE SD/HD/3G-SDI