^
Advanced Search

AR# 50944 7 Series Integrated Block for PCI Express v1.6 (ISE 14.2/Vivado 2012.2) - Tandem PCIe and Tandem PROM support

Description


Version Found: v1.6
Version Resolved and other Known Issues: See (Xilinx Answer 40469)

Tandem PCIe and Tandem PROM are supported with the 7 Series Integrated Block for PCI Express v1.6 core, but it is currently available as Beta version only.
Note: Tandem PCIe and Tandem PROM support as Beta version is currently available in ISE Design Suite only; it is currently not supported in Vivado Design Suite. Hardware validation for both Tandem PROM and Tandem PCIe is still pending. The beta feature could be used to generate the core and see the new ports that are required and some of the new constraints.

Solution

The full support for Tandem PCIe and Tandem PROM will be available in a future release of the core.

NOTE: "Version Found" refers to the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

Revision History
07/25/2012 - Initial release

Actions

AR# 50944
Date Created 07/23/2012
Last Updated 08/02/2012
Status Active
Type
Tools
  • ISE Design Suite - 14.2
  • Vivado - 2012.2
IP
  • 7 Series Integrated Block for PCI Express (PCIe)
Feed Back