UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 51374

ChipScope IBERT, Kintex-7 - Why am I unable to set a 0.5 Gb/s line rate in IBERT for a Kintex-7 device?

Description

The GTX Wizard and data sheets show a minimum line rate of 0.5 Gb/s for the Kintex-7 GTX FPGAs. Nonetheless, IBERT does not allow line rates this low; instead, it is ~.6 Gb/s.

Solution

This is a known problem with the Wizard and has been fixed in 14.3.

AR# 51374
Date Created 08/20/2012
Last Updated 10/18/2012
Status Active
Type General Article
Devices
  • Kintex-7
IP
  • ChipScope Pro IBERT for Kintex-7 GTX