UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 51902

14.x Power Analysis (XPA) - Zynq-7000 - How do I do power analysis for the PS of Zynq?

Description

How do I perform power analysis on the ARM processor (PS) of a Zynq device?

Solution

Zynq devices are supported in XPA 14.3. To do so the user is expected to provide an XML file detailing the Zynq device configuration which will in turn be read by XPA and power will be estimated.

The recommended way to do it would be to:

  1. Open XPE 14.3
  2. Switch to the relevant Zynq device and enter all the Zynq processor relevant information in the PS tab
  3. Export an XPA Settings file from XPE using the Export button on the Summary page
  4. Load the settings file which was created from XPE (<design.xpa>) with theZynq-7000 NCD into XPA
AR# 51902
Date Created 11/06/2012
Last Updated 11/06/2012
Status Active
Type General Article
Devices
  • Zynq-7000
Tools
  • ISE Design Suite - 14