UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52321

Zynq-7000 ZC702 Getting Started Guide (UG926) - Default Jumper and Switch Settings

Description

The Zynq-7000 ZC702 Getting Started Guide v1.2.1 (UG926) lists the default Jumper and Switch settings in Table 1-1 and Table 1-2. These default Jumper and Switch settings are also shown in Figure 1-3 of the user guide, however, they do not match the information in the tables.

What are the correct default Jumper and Switch settings?

Solution

The correct default Jumper and Switch settings for the ZC702 are provided in Table 1-1 and Table 1-2 of the Zynq-7000 ZC702 Getting Started Guide v1.2.1 (UG926) and should be used for reference.

Figure 1-3 has been updated in UG926 v4.0 and is now called Figure 1-4.  Figure 1-4 includes the correct jumper and switch settings which match Table 1-1.


Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
47864 Zynq-7000 AP SoC ZC702 Evaluation Kit - Known Issues and Release Notes Master Answer Record N/A N/A
AR# 52321
Date Created 10/10/2012
Last Updated 06/11/2013
Status Active
Type General Article
Boards & Kits
  • Zynq-7000 All Programmable SoC ZC702 Evaluation Kit