We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52499

2015.2 - The result of report_utilization for the Laguna register in the GUI is incorrect


I run report_utilization in the GUI and Tcl console separately.

In the Tcl console (run report_utilization), I get the following result:

It shows that 2048 Laguna registers are used.

In the GUI utilization report (run report_utilization -name test), I get a different result:

It shows that no Laguna register is used.


The utilization result in Tcl is correct.

The utilization result in the GUI is fixed in Vivado 2015.3.

AR# 52499
Date Created 10/19/2012
Last Updated 10/23/2015
Status Active
Type General Article
  • Kintex UltraScale
  • Vivado Design Suite - 2015.2