UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52566

7 Series FPGAs Transceiver Wizard v2.2 - Page 2 of Wizard offers GTX_X1Y0 - GTX_X1Y7 when it should be GTX_X0Y0 - GTX_X0Y7

Description

When using the "7 Series Transceiver Wizard" v2.2 in the 14.2 software, for device XC7K70T-2FBG676, on page 2 of the Wizard you can see that the transceivers available are GTX_X1Y0 - GTX_X1Y7. These are incorrect and should in fact be GTX_X0Y0 - GTX_X0Y7 (as per page 331 of the 7 Series FPGAs GTX/GTH Transceivers User Guide, UG476). This may be just a visual issue as the UCF of the example design uses X0Y0 as a constraint.

Solution

This is an issue only in ISE Design Suite 14.2 (v2.2 of the core) and ISE Design Suite 14.3 (v2.2 and v2.3 of the core) and not an issue in v2.1 of the core in the earlier ISE releases. This is fixed in the next release of the wizard core.

AR# 52566
Date Created 10/24/2012
Last Updated 11/16/2012
Status Active
Type General Article
Devices
  • Kintex-7
  • ??????