We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 52883

LogiCore Digital Pre-Distortion (DPD) v6.0 - Why does the DPD v6.0 Debug wrapper fail with a "non-creatable array value" error to properly generate?


Why does the DPD v6.0 Debug wrapper fail to properly generate with a "non-creatable array value?"

C:\dpd_v6_0_dbg_rev1\vhdl>create_wrapper.pl dpd_debug_wrapper.vht dpd_122M_v6.vho
Modification of non-creatable array value attempted, subscript -3 at C:\dpd_v6_0_dbg_rev1\vhdl\create_wrapper.pl line 111, <VHO_FILE> line 151.


This is a known issue that will be addressed in a future release of the DPD v6.0 Debug download.

Please open a casethe Xilinx Technical Support if you run into this problem.

For a detailed list of Digital Pre-Distortion (DPD) Release Notes and Known Issues, see (Xilinx Answer 33521).
AR# 52883
Date Created 11/12/2012
Last Updated 11/13/2012
Status Active
Type General Article
  • Digital Pre-Distortion (DPD)