UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 529

5.2 XSIMMAKE - Possible cause of XSIMMAKE 5.0 ERROR 7 (sh: 17067 Memory fault - core dumped)

Description

On some designs, XDRAW does not correctly draw the simulation schematic.
SHORT DESCRIPTION: Possible cause of XSimMake ERROR 7

XSIMMAKE COMMAND : check -p sdesign

sh: 17067 Memory fault - core dumped

ERROR 7: Command [check -p sdesign ] failed to execute properly.

When running XSIMMAKE on a ViewLogic design, XSIMMAKE fails after running
XDRAW, during check, producing the above error message.

On some designs, XDRAW does not correctly draw the simulation schematic.
The call to check -p following XDRAW will stop XSIMMAKE with a memory fault
and then Error 7. This occurs most often with "four way intersections" or
other unusual net/bus routing.
SHORT DESCRIPTION: Possible cause of XSimMak

Solution

Open the simulation schematic and look for missing or unconnected nets.
Redraw the offending sections of the original design and then rerun XSimMake.

AR# 529
Date Created 08/31/2007
Last Updated 03/22/2000
Status Archive
Type ??????