UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 53091

2012.4 Vivado - Deleting ports after make_diff_pair_ports command cause exception

Description

After running the Tcl command "make_diff_pair_ports", I go to the tab "I/O Ports" and delete all of the ports.

The Vivado IDE interface closes and the command prompt shows the message below:

Abnormal program termination (11)
Please check '<>_pid<>.log' for details

Solution

The abnormal program termination occurs only when using both the "make_diff_pair_ports" and the delete port operation together.

This problem is fixed in release 2013.1  of Vivado Design Suite.


AR# 53091
Date Created 11/23/2012
Last Updated 05/20/2014
Status Active
Type Known Issues
Devices
  • Artix-7
  • Kintex-7
  • Virtex-7
Tools
  • Vivado Design Suite - 2012.4