We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 53351

How to create a .vcd file in Vivado XSIM?


How do I create a .vcd file in Vivado XSIM?


Below are the steps to generate a .vcd file:
1.    Run the simulation.
2.    When the XSIM simulation window appears, enter these commands in the tcl console:
  1. open_vcd
  2. log_vcd [get_object /<toplevel_testbench/uut/*>]
  3. run *ns
  4. close_vcd

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
58882 Xilinx Simulation Solution Center - Design Assistant - Vivado Simulator - Behavioral Simulation N/A N/A
AR# 53351
Date Created 12/05/2012
Last Updated 09/02/2014
Status Active
Type General Article
  • FPGA Device Families
  • Vivado Design Suite