We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 53542

LogiCORE IP Serial RapidIO Gen2 v1.6 (ISE 14.4 / Vivado 2012.4) - Link might train down on 6.25Gbaud x2 and 6.25Gbaud x4 core configurations


Version Found: v1.6
Version Resolved and other Known Issues for v1.6 core: See (Xilinx Answer 52797)

The Virtex-7 and Kintex-7 FPGA GT wrappers generated with 6.25Gbaud x2 and 6.25Gbaud x4 core configurations might cause the link to train down. This issue is seen only in the wrappers for production devices and not on IES and GES wrappers.

Note: v1.6 is the first version of the core that comes with Virtex-7/Kintex-7 FPGA production device wrappers.


This is a known issue to be fixed in a future release of the core.

To avoid this issue, generate the wrapper from the GT Wizard and replace the GT specific wrappers generated with the LogiCORE IP Serial RapidIO Gen2 v1.6 core with the ones generated from the GT Wizard.

NOTE: "Version Found" refers to the version where the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

Revision History
12/18/2012 - Initial release

AR# 53542
Date Created 12/17/2012
Last Updated 12/18/2012
Status Active
Type Known Issues
  • Serial RapidIO