We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Page Bookmarked

AR# 53632

Configuration simulation testbenches


Where do I download the example testbenches for Xilinx configuration simulation?


This Answer Record provides the test benches for 7 series, Virtex-6 and Spartan-6 FPGA in attachments.

Use the following steps when you need to use those test benches.

1. Download the zip files for the family that you are targeting.

2. Unzip the files to a folder.

3. Open ModelSim and change directory to this folder.

4. Run 'do sim_<operation name>_<family name>.do'

If you are using ISIM, you can use the test benches (cfg_<family name>_<operation name>_tb.v files) only and ignore the .do files and simulation models because you have pre-compiled models in ISIM.

For older devices, e.g., Spartan-3 Generation FPGA, you can find the test benches from below link.


Refer to the Synthesis and Simulation Design Guide for more information about the Xilinx Configuration Simulation models.


Associated Attachments

Name File Size File Type
spartan6.zip 449 KB ZIP
virtex6.zip 800 KB ZIP
7series.zip 18 MB ZIP
AR# 53632
Date 04/29/2014
Status Active
Type General Article
  • Kintex-7
  • Spartan-6
  • Virtex-7
  • More
  • Virtex-6
  • Artix-7
  • Spartan-3A
  • Spartan-3A DSP
  • Spartan-3AN
  • Virtex-5
  • Less