UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 54244

14.x - PAD REPORT: Inconsistencies for IOB cells between PAD and MAP reports

Description

I have generated the PAD report from the Implementation tool.

There are some discrepancies between this report and the report generated in the MAP stage (*.mrp report file) for the IOB cells.

Which report is correct?

Solution

This is a known issues for the PAD report.

This problem has been reported in ISE 12.3 up to 13.3.
 
For some parts the number and location of some IOB cells are not listed under the PAD report.

It is recommended to follow Section 6  - "IOB properties" from the MAP report when checking the IOB cells.


Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
47294 14.x Project Navigator - Known Issues for Project Navigator 14.x N/A N/A
39243 ISE Design Suite 13 - Known Issues N/A N/A
35117 12.x ISE - Known Issues for Project Navigator 12.x N/A N/A
AR# 54244
Date Created 02/13/2013
Last Updated 03/25/2015
Status Active
Type Known Issues
Devices
  • FPGA Device Families
Tools
  • ISE Design Suite - 14