This answer record contains the Release Notes and Known Issues for the AXI Interrupt Controller and includes the following:
This Release Notes and Known Issues Answer Record is for the core generated in Vivado 2013.4 and older tool versions.
Please reference XTP025 - IP Release Notes Guide for past known issue logs and ISE support information.
LogiCORE AXI Interrupt Controller IP Page:
Supported Devices can be found in the following three locations:
For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado.
This table correlates the core version to the first Vivado design tools release version in which it was included.
|Core Version||Vivado Tools Version|
The table below provides answer records for general guidance when using the LogiCORE IP AXI Interrupt Controller.
|(Xilinx Answer 55248)||Vivado Timing and IP Constraints|
|(Xilinx Answer 51127)||14.4 EDK Libgen does not support external interrupt vector connected to axi_intc|
|(Xilinx Answer 51138)||14.4 EDK - How can I add interrupts to my AXI CIP generated IP and test this on MicroBlaze or ARM?|
Known and Resolved Issues
The following table provides known issues for the AXI Interrupt Controller, starting with v3.0, initially released in the Vivado 2013.1 tool.
Note: The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.
There are no known issues for the Vivado 2013.1 tool.
04/03/2013 - Initial release
12/18/2013 - Updated for 2013.4