This answer record contains the Release Notes and Known Issues for the LogiCORE IP SMPTE2022-1/2 Video Over IP Transmitter Core and includes the following:
This Release Notes and Known Issues Answer Record is for the core generated in the Vivado 2013.1 tool and later versions.
LogiCORE IP SMPTE2022-1/2 Video Over IP Core Transmitter IP Page:
Supported Devices can be found in the following three locations:
For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado.
Table 1: Version
This table correlates the core version to the first Vivado design tools release version in which it was included.
|Core Version||Vivado Tools Version|
|v2.0 (Rev. 5)||2016.1|
|v2.0 (Rev. 4)||2015.4|
|v2.0 (Rev. 3)||2015.3|
|v2.0 (Rev. 2)||2015.1|
|v2.0 (Rev. 1)||2014.4|
|v1.0 (Rev. 3)||2014.2|
|v1.0 (Rev. 2)||2014.1|
|v1.0 (Rev. 1)||2013.4|
Table 2: General Guidance
The table below provides Answer Records for general guidance when using the LogiCORE IP SMPTE2022-1/2 Video Over IP Transmitter Core.
Known and Resolved Issues
The following table provides known issues for the LogiCORE IP SMPTE2022-1/2 Video Over IP Transmitter Core, starting with v1.0, initially released in the Vivado 2013.3 tool.
Note: The "Version Found" column lists the version the problem was first discovered.
The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.
|Answer Record||Title||Version Found||Version Resolved|
|(Xilinx Answer 65268)||Why does the AXI-MM WVALID wait on the WREADY to be asserted?||v2.0||N/A|
|(Xilinx Answer 62220)||Why do I see simulation mismatches when more than one channel is selected and using Vivado Simulator 2014.3 for simulation?||v2.0||N/A|
|04/06/2016||Added v2.0 (Rev.1), v2.0 (Rev.2), v2.0 (Rev.3), v2.0 (Rev. 4) and v2.0 (Rev. 5) to the Version Table|
|10/08/2014||Added v1.0 (Rev.1), v1.0 (Rev.2), v1.0 (Rev.3) and v2.0 to the Version Table and (Xilinx Answer 62220)|