UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 55131

LogiCORE 10-Gigabit Ethernet MAC - Vivado - In WAN mode, marginal timing has been seen when targeting Artix-7 devices

Description

If using 10-Gigabit Ethernet MAC core generated with WAN mode, marginal timing has been seen when targeting Artix-7 devices.

Solution

If small timing failures occur, changing some Vivado Synthesis and Implementation tool options has been seen to result in the timing passing. 

Some possible options are:

  • In Implementation Settings, under Place Design, set the directive to "ExtraPostPlacementOpt".
  • In Implementation Settings, enable "phys_opt_design".
  • In Synthesis Settings, change the "control_set_opt_threshold" to 60.


Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
54252 LogiCORE IP 10G Ethernet MAC - Release Notes and Known Issues for Vivado 2013.1 and newer tool versions N/A N/A
AR# 55131
Date Created 03/25/2013
Last Updated 06/19/2014
Status Active
Type General Article
IP
  • 10 Gigabit Ethernet Media Access Controller