UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 55292

2013.1 Vivado Serial Analyzer - "set_property" commands each require a "commit" when writing commands to the Tcl console

Description

Calling multiple "set_property" commands followed by a single "commit" in the Tcl console might not properly write the desired properties to hardware. Instead, users must include a "commit" after each "set_property" command as shown below:

Might not set GTTXRESET:

set link [index [get_hw_sio_links] 0]
set_property REG.GTTXRESET 1 $link
set_property REG.ERR_INJECT_CTRL 1 $link
commit_hw_sio $link

Solution

Work-around:

set link [index [get_hw_sio_links] 0] 
set_property REG.GTTXRESET 1 $link
commit_hw_sio $link
set_property REG.ERR_INJECT_CTRL 1 $link
commit_hw_sio $link

This issue is fixed in Vivado Design Suite 2013.2.

AR# 55292
Date Created 04/01/2013
Last Updated 09/26/2013
Status Active
Type Known Issues
Devices
  • Virtex-7
Tools
  • Vivado Design Suite - 2013.1
IP
  • ChipScope Pro IBERT for 7 Series GTH