We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 55407

RTL Schematic - View RTL Schematic does not show inputs which are set by constant number


When module has a constant number input port (e.g. .in1( 8'h3C )) the RTL Schematic does not show all pins of the port correctly.

Some design will show input as connecting GND/VCC, but some designs show no connection.


The Technology View schematic should be used in place of the RTL View schematic in these cases.
Alternatively, a user could view the schematic design in PlanAhead or Vivado Integrated Design Environment.

See: (Xilinx Answer 41500) - The difference between RTL and technology schematic

Linked Answer Records

Child Answer Records

Answer Number Answer Title Version Found Version Resolved
41500 RTL/Technology Viewer - The difference between RTL and technology schematic N/A N/A
AR# 55407
Date Created 04/05/2013
Last Updated 04/05/2013
Status Active
Type Known Issues
  • ISE Design Suite