We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 5543

1.5i PAR - Placement error related to use of carry logic in guided PAR.


ERROR:x45pl:38 - Carry logic cannot be placed due to a conflict in
location constraints. The required placement for the carry logic chain is as follows:

This occurs in both exact and leverage mode.


A fix for this problem is included in the 1.5i Service Pack 1. For details
on this Service Pack see http://www.xilinx.com/techdocs/5514.htm
AR# 5543
Date Created 08/31/2007
Last Updated 10/21/2008
Status Archive
Type General Article