We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 55487

14.5 SDK - SDK is displaying lots of "Type xxx could not be resolved" errors in the SDK editor on a previously working SDK project


After porting a working SDK workspace to 14.5 and re-compiling, the SDK tool is showing:

"Type xxx could not be resolved"

The project compiles properly.

How can this be disabled?


In the SDK editor, the message is similar to the following:

This is a new feature in Eclipse 3.8, which introduces a new static code analysis tool called "CODAN" and is enabled by default.

If you do not want to see code analysis errors and warnings, perform the following:

  1. Window -> Preferences -> C/C++ -> Code Analysis -> Uncheck all the checked boxes:
  2. Click OK to apply the changes.


AR# 55487
Date Created 04/10/2013
Last Updated 04/10/2013
Status Active
Type General Article
  • Zynq-7000
  • EDK - 14.5