UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 5550

M1.5i Virtex Timing - Timing tools are not heeding DUTY_CYCLE_CORRECTION parameter.

Description

General Description:

The timing engine is ignoring the DUTY_CYCLE_CORRECTION

parameter when passing a NET PERIOD constraint though the

CLKDLL.

Solution

A fix for this problem is included in the 1.5i Service Pack 2. For details

on this Service Pack see http://www.xilinx.com/techdocs/5887.htm

AR# 5550
Date Created 08/31/2007
Last Updated 01/18/2010
Status Archive
Type General Article