UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 55726

2013.1 Vivado IP Flows - Upgrading a Vivado IP core results in "ERROR: [IP_Flow 19-503] Validation failed for parameter..."

Description

In the Vivado 2013.1 tool, when I upgrade certain IP cores, a series of warning and error messages similar to the following occur:

7 Series GT Wizard v2.4

upgrade_ip -vlnv xilinx.com:ip:gtwizard:2.5 [get_ips  my_gtwizard]

Removed parameter gtz0_val_reference_clock
Removed parameter gtz1_val_reference_clock
Removed parameter gtz2_val_reference_clock
Removed parameter gtz3_val_reference_clock

WARNING: [IP_Flow 19-2191] Attempt to set value '00000000' on disabled parameter 'gt0_val_clk_cor_seq_2_3' is ignored
WARNING: [IP_Flow 19-2191] Attempt to set value '00000000' on disabled parameter 'gt0_val_clk_cor_seq_2_4' is ignored
ERROR: [IP_Flow 19-503] Validation failed for parameter 'gt_type'. For this device GTX is disabled. So please select other options

ERROR: [IP_Flow 19-3196] Value 'DFE-Auto_(no_sliding_TAP)' is out of the range for parameter 'gt0_val_dfe_mode'. Valid values are - DFE-Auto, DFE-Manual, LPM-Auto.
ERROR: [IP_Flow 19-3235] Customization errors found. Encountered problem restoring previous valid configuration, see errors below.
ERROR: [IP_Flow 19-503] Validation failed for parameter 'gt_type'. For this device GTX is disabled. So please select other options

ERROR: [IP_Flow 19-3196] Value 'left_column' is out of the range for parameter 'gt_column'. Valid values are - right_column.
ERROR: [IP_Flow 19-503] Validation failed for parameter 'gt0_val'. No Active Transceivers!

ERROR: [IP_Flow 19-503] Validation failed for parameter 'gt1_val'. No Active Transceivers!

ERROR: [IP_Flow 19-503] Validation failed for parameter 'gt2_val'. No Active Transceivers!

FIFO Generator v10.0

upgrade_ip -vlnv xilinx.com:ip:fifo_generator:10.0 [get_ips afifo]

WARNING: [IP_Flow 19-2191] Attempt to set value '1023' on disabled parameter 'Full_Threshold_Assert_Value_wach' is ignored
...
ERROR: [IP_Flow 19-508] Validation failed for parameter 'Full_Threshold_Assert_Value_wach'. Value '1' is out of the range (6,1023)

In spite of the errors, the IP seems to be upgraded successfully. 

Solution

The upgrade of the core is not being handled properly.

To resolve this issue in the Vivado 2013.1 tool, install the patch at the end of this answer record for the designated OS in conjunction with the specific patch for the IP being upgraded.

Refer to the readme file for instructions on how and where to install the patch files.

This issue will be resolved and this patch will no longer be required in the Vivado 2013.2 tool.

Attachments

Associated Attachments

AR# 55726
Date Created 04/25/2013
Last Updated 05/06/2013
Status Active
Type Known Issues
Tools
  • Vivado Design Suite - 2013.1