UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 55955

14.5 iMPACT - Executing an XSVF created in iMPACT GUI for indirect BPI programming with Kintex-7 devices produces an error

Description

I have created and attached a MCS file for BPI device on KC705 board in iMPACT 14.5. BPI programming works fine using the MCS file.

I have created an SVF file in the iMPACT GUI to program the BPI device. The SVF played successfully.

I have created an XSVF file in the iMPACT GUI to program the BPI device, but when attempting to execute the XSVF, the following error occurs:

"ERROR:iMPACT:1876 - The xsvf execute operation did not complete successfully."

Solution

To work around this issue, convert the working SVF to XSVF using iMPACT batch mode and the following command:

svf2xsvf -w -r 0 -fpga -rlen 36000 -i input.svf -o output.xsvf

The generated XSVF should work without any issues.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
47890 14.x iMPACT - Known Issues for the iMPACT 14.x tools N/A N/A
AR# 55955
Date Created 05/10/2013
Last Updated 05/13/2013
Status Active
Type General Article
Devices
  • Kintex-7
Tools
  • ISE Design Suite - 14
  • ISE Design Suite - 13.4