We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 56672

NGDBuild - Is there any option to bypass unmatched UCF constraints errors?


I am running an incomplete design with a complete UCF (a UCF contains all constraints for the complete design).

NGDBuild gives the following errors on constraints in which the objects do not exist in the incomplete design.

Error: Constraintsystem: 58

Error: Constraintsystem: 59

Is there any option to bypass this type of error rather than manually removing/commenting out the constraints?


The -aul and -aut options are available with NGDBuild to bypass this type of error on LOC and TNM/TNM_NET constraints. 

However, for other constraints such as NET TIG or AREA GROUP, you must remove/comment out the constraints in the UCF manually.

AR# 56672
Date Created 07/03/2013
Last Updated 03/11/2015
Status Active
Type General Article
  • ISE Design Suite - 14