UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 56692

Vivado Simulator: How to use a custom Modelsim command file with Vivado?

Description

ModelSim generates the following warning when the -do command is passed through "More VSIM Options" from the simulations settings:

 

# Warning: Ignoring nested -do argument: "do ../../../<waveform_wts_bft>.do"

 

Is there any way to work around this?

 

Solution

It is recommended to pass the waveform configuration as the "custom_udo" file.


"*.udo" is equivalent to "*.do" but Xilinx recommends to edit this file if you want to add modifications in the post-simulation process.

 
Select the Simulation set to access these parameters. 

 

See below screen shot:
wts_workaround.PNG

 

AR# 56692
Date Created 07/04/2013
Last Updated 09/04/2014
Status Active
Type Known Issues
Devices
  • Artix-7
  • Kintex-7
  • Virtex-7
Tools
  • Vivado Design Suite - 2013.2